AVR initilization failed

AVR initilization failed


This means that the programmer couldn’t talk to the chip. If you are using a “simple” programmer such as a serial or parallel port bitbang programmer, it could mean the programmer is at fault. Otherwise, it usually means the programmer is OK but it couldnt find the chip.

Check that the chip is powered, plugged into the socket or programmer properly, the programming cables are plugged in correctly, the header is wired correctly, etc. 99% of the time, it is a problem with wiring.


[My Solution]
I bought a new Programmer and new ISP cable, the error never ever comes
again. In my case is not the wiring, but the hardware is broken.



About yingding wang
i am looking forward to innovation in IT and Robotics

Comments are closed.

%d bloggers like this: